#CUBE PRO MOTOR COM FAILURE HOW TO#
#CUBE PRO MOTOR COM FAILURE UPDATE#
#CUBE PRO MOTOR COM FAILURE MANUAL#
#CUBE PRO MOTOR COM FAILURE CODE#

Shimano error codesДЄfter the Bosch Performance CX, the Shimano EP8 is the most widely used motor on the market and successor to the popular Shimano STEPS E8000.

Bosch eBike Systems have listed all error codes in the Kiox display user manual. Not only does it work flawlessly, it also means fewer problems with the magnet.ДЇortunately, isolated error messages rarely occur in practice according to Bosch eBike Systems. Some manufacturers combine the Shimano brake rotor with an integrated magnet and the Bosch sensor. 503.ДЄn additional clamp prevents the magnet from twisting.

#CUBE PRO MOTOR COM FAILURE CODE#

If the spoke magnet is not installed correctly, the Bosh system will display error code n. Please refer to your drivetrain manufacturerвЂ™s operating instructions. The Bosch system indicates the error and the adjustment or correction must be made on the respective drivetrain. The drivetrain is not configured correctly, which can result in the drivetrain and the Bosch drive system not working together correctly.

If the battery can no longer be charged, the only thing left to do is to replace it.ДЄ gearbox error is an eShift problem. Individual cells may be deep-discharged or even damaged after a long break. If the problem persists, contact your Bosch ebike dealer. Switch the ebike off, remove the battery and reinstall it. If the problem persists, contact your Bosch ebike dealer.Д®rror in communication with the ebike battery Checks the position of the spoke magnet and restarts the system. This mistake can appear as a misinterpretation of a misaligned or improperly fitted spoke magnet.

If the problem persists, contact your Bosch ebike dealer.Д¬heck the placement of the spoke magnet (8 to 14 mm distance is optimal, parallel to the line on the sensor). Your dealer uses online access to the Bosch ebike server to obtain the correct software.

#CUBE PRO MOTOR COM FAILURE UPDATE#

Your Bosch ebike dealer can update the software using the Bosch DiagnosticTool. The system has found an outdated or incompatible software version. This is possible via the handlebar mount, where the onboard computer is charged from the ebike battery, or with the help of a mobile phone charger and the USB connection of the onboard computer. Internal battery of the on-board computer empty (not with BUI350) We asked the people at Bosch eBike Systems to enlighten us on the most common error messages of their onboard computer.

#CUBE PRO MOTOR COM FAILURE MANUAL#

A glance at the comprehensive user manual of the Bosch ebike system lists 50 different error codes with their causes and solutions.

The Bosch Performance CX is one of the most widely used eMTB motors on the market. If these simple steps donвЂ™t do the trick, have a look at the error code and check what it means вЂ“ it really helps! Below are some of the most common error codes and their solutions.

Is the spoke magnet still there? Is it twisted? If the magnet is missing, the motor canвЂ™t determine the speed correctly and either switch into an emergency mode or stop working altogether.

Are all contacts intact? See if the display is properly engaged and check all visible connection points.

Check that your battery is correctly installed and charged.

As with a computer, rebooting can work wonders!

Switch off the bike completely and wait for approximately 10 seconds.

#CUBE PRO MOTOR COM FAILURE HOW TO#

Before we go deeper into the error codes of the individual systems, here are a few general tips on how to solve the most common problems on the fly: Errors occur, for example, when a sensor fails to calibrate correctly, when a connection is interrupted or when the software encounters an anomaly. And eMTBs, too, can display error codes to warn you that something is wrong with the system. If youвЂ™ve spent any time on the internet, youвЂ™re familiar with вЂњError 404 вЂ“ Page not foundвЂќ.

Cube pro motor com failure